PTH Sticker

Back Glass Vinyl Decal Installation

1. Clean the back glass thoroughly with rubbing alcohol and let it dry completely.
2. Peel the blue backing off the decal.
3. Carefully place the decal on the glass, making sure it is straight before pressing it down.
4. Starting from the center, use a credit card or squeegee to firmly press the decal onto the glass, working outward to remove all air bubbles.
5. Once the decal is fully adhered, slowly peel away the clear transfer tape, leaving the vinyl on the glass.
6. If any part of the vinyl lifts with the transfer tape, lay the tape back down and press firmly with the card before peeling again.

Tip: For the best results, install the decal on a clean, dry surface and avoid washing the vehicle for 24 hours after application.